상품명 | 마텍 GPS M8Q-CAN (Compass내장) |
---|---|
판매가 | 69,000원 |
국내·해외배송 | 국내배송 |
배송방법 | 택배 |
배송비 | 3,500원 (500,000원 이상 구매 시 무료) |
SNS 상품홍보 | |
---|
(최소주문수량 1개 이상 / 최대주문수량 0개 이하)
사이즈 가이드할인가가 적용된 최종 결제예정금액은 주문 시 확인할 수 있습니다.
(점심 12시 30분 - 1시 30분)
토/일요일 및 공휴일은 휴무입니다.
배송/재고 문의 : 070-7715-2210
상품/기술 문의 : 070-7715-2211
"평일 5시 전으로 주문하시면 당일 발송됩니다."
Matek Systems GNSS M8Q-CAN, UAVCAN & MSP
- 마텍 신형 GPS+Compass 모듈입니다.
- 디지털 에어스피드 센서를 사용할때 FC와의 연결이 용이합니다.
- 마텍 H743-WING에 디지털에어스피드 센서와 함께 사용하시는걸 강추드립니다.
<설치방법>
(화살표가 전방을 향해 설치한 뒤에)
아두파일럿에서는 그대로 사용하시면 됩니다.
INAV나 베타플라이트에서는 프로그램세팅에서 시계방향으로 270'돌리셔야합니다.
<Tip>
파워라인(모터, ESC)에서 10cm이상 떨어뜨려서 장착하십시오.
세라믹 안테나의 스크레치는 ublox에서 튜닝한 결과입니다. 신경쓰지 마십시오.
HD카메라가 GPS신호를 방해할 수 있습니다. GPS가 위성신호를 잡기 전엔 HD카메라를 꺼두십시오.
구성
하단 사진 참조
Specifications
ArduPilot AP_Periph F303 CAN node
GPS SAM-M8Q (GPS, GLONASS, Galileo)
Magnetic Compass QMC5883L
Barometer DPS310
UART1, Firmware update
UART2, onboard GPS
UART3, MSP Protocol
CAN, UAVCAN Protocol
I2C, onboard QMC5883L & DPS310
I2C JST-GH connector, external AirSpeed sensor
CAN bootloader LED, Blue
Fast blinking, No communication between CAN node and Flight Controllers
Slow blinking, Communicating between CAN node and Flight Controllers
GPS PPS LED, Green
blinking(1Hz) when GPS has 3D fixed
Boot button
Input voltage range: 4.5~5.5V (5V pad/pin)
Power consumption: 100mA
Operating Temperatures: -20~80 °C
29mm*29mm*9.7mm
11.3g
Includes
1x M8Q-CAN
2x JST-GH-4P to JST-GH-4P 20cm silicon wire
Tips
u-blox M8Q series has no external flash memory
Compass Alignment(Arrow forward and flat mounting):
Ardupilot/Mission Planner: Rotation None
Make sure to have compass/magnetometer 10cm away from power lines/ESC/motors/iron based material
The scratches on ceramic antenna are the result of tuning the antenna by ublox.
HD cameras(Gopro, Split, Tarsier, etc) could interfere GPS signal, try turning off HD camera before GPS 3D fix
상품의 사용후기를 적어주세요.
게시물이 없습니다
상품에 대해 궁금한 점을 해결해 드립니다.
게시물이 없습니다