상품명 | Flyduino KISS FC V1.03 |
---|---|
판매가 | 49,000원 |
국내·해외배송 | 국내배송 |
배송방법 | 택배 |
배송비 | 3,500원 (500,000원 이상 구매 시 무료) |
SNS 상품홍보 | |
---|
(최소주문수량 1개 이상 / 최대주문수량 0개 이하)
사이즈 가이드할인가가 적용된 최종 결제예정금액은 주문 시 확인할 수 있습니다.
(점심 12시 30분 - 1시 30분)
토/일요일 및 공휴일은 휴무입니다.
배송/재고 문의 : 070-7715-2210
상품/기술 문의 : 070-7715-2211
"평일 5시 전으로 주문하시면 당일 발송됩니다."
Flyduino KISS FC V1.03
- 독일 Flyduio사의 플라이트컨트롤러입니다.
- MPU6050칩을 사용합니다.
- 스펙트럼 위성과 PPM, SBUS를 지원합니다.
- 5V bec가 내장되어 있습니다.
- 전용 GUI프로그램을 이용하여 세팅합니다.
최신 V1.3펌웨어로 업데이트하여 출고됩니다.
납땜 전 충분히 테스트 해보시기 바랍니다. FC특성상 납땜 후 교환은 불가합니다.
구성
KISS FC 1개
펌웨어 업데이트와 세팅 방법은 아래 링크를 참고하세요.
1편 http://cafe.naver.com/droneracer/30725
2편 http://cafe.naver.com/droneracer/30833
3편 http://cafe.naver.com/droneracer/30843
New version
- changed bootloader solderpads to a press button
- changed USB Port type
As we felt the need for a modern more simplified 32bit Flightcontroller, we made the KISS FC, which includes a complete own Flight Controll Firmware development who get rid of some old ballast, this took some time, but the result is very pleasing.
The Idea was to simplify some things and due to intensive long term testings of some pretty good Pilots we where able to optimize the code to a point where you hopefully get your quad in the air quite quick.
Normally you just need to choose your Airframe in the GUI and are able to fly (at least with KISS ESC), otherwise you can download presets of well knowen Pilots for given configurations and of course can tweak the PID yourself over the GUI.
The software setup side is reduced as far we can, many things are allready taken in to account for you, if you bring some solid soldering skills you should be able to build your quad pretty quick.
A new feature is also the inbuild telemetry, in combination with our 32bit ESC line its possible to show the live telemetry data via OSD on your FPV live feed or in the KISS FC GUI
This way you get usefull informations like the Voltage of your battery, current consumption, ESC temperature and motor RPM.
Supported copter types:
- Tri
- Quad +/x
- Hexa +/x
Supported RX types:
- PPM Sum
- Spektrum Sat. (serial / DSM2 & DSMX)
- Futaba / Taranis SBUS
- Jeti ExBus
- Graupner SumD / SumO
- MultiPlex
- classic RX with single channel output
- STM32F303CCT6
- MPU6050
Weight: 4.6g
Mounting Holes: 3x3cm pattern, with 3.2mm holes (widely compatible)
Voltage: 2-6S
Driver for STM32F303CCT6
Normally you dont need to download any driver for the USB support.
Windows 7 8 and 10 care for this on their own after you connected the device.
The connection diagramm / Pinout you find in KISS-FC GUI.
DOWNLOADS (Manuals, Firmware, GUIs): http://kiss.flyduino.net/downloads/
MinimOSD Arduino OSD Software (kompatibel zu unserem MinimOSD Version)
Note: Please extract the KISS_OSD.ZIP and copy the "MAX7456" folder into the "libraries" folder of your Arduino IDE.
MinimOSD Hardware
Connection cable KISS FC -> ESC24A PDB
KISS FC MANUAL by Philipp Seidel
상품의 사용후기를 적어주세요.
게시물이 없습니다
상품에 대해 궁금한 점을 해결해 드립니다.
게시물이 없습니다