상품명 | [판매종료] 마텍 F765-WSE 플라이트 컨트롤러 |
---|---|
판매가 | 99,000원 |
국내·해외배송 | 국내배송 |
배송방법 | 택배 |
배송비 | 3,500원 (500,000원 이상 구매 시 무료) |
SNS 상품홍보 | |
---|
(최소주문수량 1개 이상 / 최대주문수량 0개 이하)
사이즈 가이드할인가가 적용된 최종 결제예정금액은 주문 시 확인할 수 있습니다.
(점심 12시 30분 - 1시 30분)
토/일요일 및 공휴일은 휴무입니다.
배송/재고 문의 : 070-7715-2210
상품/기술 문의 : 070-7715-2211
"평일 5시 전으로 주문하시면 당일 발송됩니다."
Matek Systems F765-WSE Flight Controller
- F765칩을 사용한 대형 고정익 비행 컨트롤러입니다.
- 픽스호크와 동일한 ArduPilot프로그램을 사용할 수 있습니다.
- 픽스호크보다 하드웨어스펙이 월등합니다.
- INAV도 사용가능합니다.
- 서보와 기타 기자재를 위한 다양한 BEC가 내장되어 있습니다.
- 정밀한 DPS310 고도계가 내장되어 있습니다.
- DJI FPV를 지원합니다.
구성
하단 사진 참조
FC Specifications
MCU: STM32F765VIH6, 216MHz , 512KB RAM, 2MB Flash
IMU: ICM42688-P (SPI4)
Baro: DPS310 (I2C2)
OSD: AT7456E (SPI2)
Blackbox: MicroSD card slot (SDIO)
6.5x Uarts (1,2,3,Rx5,6,7,8) with built-in inversion.
1x Softserial1_Tx (INAV)
12x PWM outputs (S1~S10 support Dshot)
6x ADC (VBAT, Current, RSSI, Analog AirSpeed, VB2, CU2)
3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
2x I2C
1x CAN
USB/Beep Extender with Type-C(USB2.0)
Dual Camera Inputs switch
9V(12V) for VTX power switch
High-precision Current Sense, 220A range
ADC VB2 voltage divider: 1K:20K
ADC AirSpeed voltage divider: 20K:20K
Static power 160mA@5V
FC Firmware
INAV: MATEKF765SE
ArduPilot: MATEKF765SE
PDB
Input voltage range: 6.8~30V (2~6S LiPo)
1x ESC power pads
Battery Voltage divider 1K:20K (Scale 2100 in INAV, BATT_VOLT_MULT 21.0 in ArduPilot)
Current Senor: 220A, 3.3V ADC (Scale 150 in INAV, 66.7 A/V in ArduPilot)
Sense resistor: 90A continuous, 220A peak
BEC 5V output
Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed
Continuous current: 2 Amps, Max.3A
BEC 9V /12V output
Designed for Video Transmitter, Camera, Gimbal ect.
Continuous current: 2 Amps, Max.3A
12V option with Jumper pad
for stable 9V/12V output, input voltage should > output voltage +1V
BEC Vx output
Designed for Servos
Voltage adjustable, 5V Default, 6V or 7.2V via jumper
Continuous current: 8 Amps, Max.10A
for stable Vx output, input voltage should > Vx voltage +1V
BEC 3.3V output
Designed for Baro / Compass module and external 3.3V peripherals
Linear Regulator
Continuous current: 200mA
Physical
Mounting: 25 x 25mm, Φ2mm
Dimensions: 44 x 29 x 14.5 mm
Weight: 22g w/ USB/buzzer adapter
Including
1x F765-WSE
1x USB(Type-C)/Beep (Passive buzzer) Extender
2x 20cm JST-GH-4P to JST-GH-4P cable for CAN & I2C port
1x 20cm JST-SH-6P to JST-SH-6P cable for USB extender.
1x Rubycon ZLH 35V 470uF capacitor
Dupont 2.54 pins (Board is shipped unsoldered)
마텍 홈페이지에 가시면 세팅에 관한 많은 자료를 찾아보실 수 있습니다.
http://www.mateksys.com/상품의 사용후기를 적어주세요.
게시물이 없습니다
상품에 대해 궁금한 점을 해결해 드립니다.
게시물이 없습니다