상품명 | ETHIX MR STEELE STOUT 모터 V4 |
---|---|
판매가 | 38,000원 |
국내·해외배송 | 국내배송 |
배송방법 | 택배 |
배송비 | 3,500원 (500,000원 이상 구매 시 무료) |
SNS 상품홍보 | |
---|
(최소주문수량 1개 이상 / 최대주문수량 0개 이하)
사이즈 가이드할인가가 적용된 최종 결제예정금액은 주문 시 확인할 수 있습니다.
(점심 12시 30분 - 1시 30분)
토/일요일 및 공휴일은 휴무입니다.
배송/재고 문의 : 070-7715-2210
상품/기술 문의 : 070-7715-2211
"평일 5시 전으로 주문하시면 당일 발송됩니다."
ETHIX MR STEELE STOUT MOTOR V4
- MR. STEELE 신형 모터입니다.
- 프리스타일에 적합한 2306사이즈입니다.
- 전 버전에 비해 효율성과 파워가 증가되었습니다.
- 9mm 스틸 베어링이 내장되었습니다.
- 착탈이 가능한 전용 모터팬츠가 두 종류 포함되어 있습니다.(로우, 하이)
- 다치기 쉬운 모터를 확실하게 보호해줍니다.
- 색상은 화이트입니다.
6셀용 1750KV입니다.
구성
모터 1개
모터팬츠 2개
볼트셋
V4 MOTOR HIGHLIGHTS/CHANGES
base redesign 16x16(only) mounting holes (structural changes for more durability)
Complete bell redesigned (durability and smoothness in mind)
Thicker single strand copper winding
increased EFFICIENCY & POWER
Complete Interchangeable motor pants redesign (thicker & more crash/low temperature resistant, better gap fitment, + more protection coverage for the “tall pants”)
better assembly tolerances
Overall QC improvements
9mm steel bearings
Eco-Friendly packaging
Motor weight 31.8g
(full-length cables) compared to Stout V3 at 30.5g
PANTS WEIGHTS
Low - 1g vs (0.8 v3)
Tall - 2g vs (1.8 v3)
All in all this motor is an absolute gem only increasing the weight by a tad over 1g from the previous model while achieving more power, efficiency, and most importantly durability.
V3- V4 COMPATIBILITY
V4 and V3 motors are completely cross-compatible.
V3 bells - V4 stator
V4 bells - V3 stator
( everything is interchangeable except pants) The pants are stator-specific and can be interchangeable but with less than desired effect.
Enjoy & Thank you for your continued support.
-Steele
SPECIFICATIONS
Stator Size (Diameter): 23mm*6mm
Kv: 1750kv
Magnets: N52SH Curved
Windings: 15turn DLRK
Shaft Length (mm): 11.5mm
Shaft Diameter (mm): 4mm
Shaft material: Steel
Bearing : NMB684
Weight (With Wires) (g): 32.4g
Cells (Lipo): 6S
Max Current (A): 45A
Max Burst Current (A): 50A
Internal Resistance (Rm): 100mΩ
Wire Spec (AWG): 20#-135mm
Base Mounting Pattern: 16x16mm
Base Mounting Thread: M3 Thread
Motor Overall Dimensions: φ28.6mm*17.5mm
INCLUDES
1 x Motor
1 x Tall Motor Pants
1 x Short Motor Pants
4 x motor screws
상품의 사용후기를 적어주세요.
게시물이 없습니다
상품에 대해 궁금한 점을 해결해 드립니다.
게시물이 없습니다